- English
- فارسی
Journal papers
2024
A. Gheysarian, A. Rezaeian, MR. Toroghinejad, R. Rahimzadeh, Microstructural studies of CuCrFeNi2Mn0.5 high entropy alloy during cold rolling, Journal of Alloys and Compounds, Volume 987, 2024, 174197, ISSN 0925-8388.
H. Safari, A. Rezaeian, F. Karimzadeh, Novel role of thermomechanical grain boundary engineering in the microstructure evolution of austenitic stainless steel, Journal of Materials Research and Technology, Volume 30, 2024, Pages 146-163, ISSN 2238-7854.
M. Hafezi, A. Kermanpur, A. Rezaeian, S. Saeidirad, V. Nikneshan, H. Rabieifar, E. Kamouri Yousefabad, Investigating crack formation in IN738LC Ni-based superalloy fabricated by laser powder-bed fusion process, Journal of Materials Research and Technology, Volume 29, 2024, Pages 1983-2002, ISSN 2238-7854.
2023
A. Gheysarian, A. Rezaeian, MR. Toroghinejad, Improvement mechanical properties of CuCrFeNi2Mn2 alloy through microstructural control with aging treatment, Intermetallics, Volume 157, 2023, 107869, ISSN 0966-9795.
A. Gheysarian, A. Rezaeian, MR. Toroghinejad, Homogenizing optimization, microstructure and tensile properties evolution of CuCrFeNi2Mn0.5 alloy, Journal of Materials Research and Technology, Volume 24, 2023, Pages 3164-3178, ISSN 2238-7854.
HR. Ghorbani, A. Kermanpur, A. Rezaeian, F. Sadeghi, A. Ahmadi Siahboumi, Solidification behavior and microstructural features of the cast and HIPed N-bearing Ti–48Al–2Cr–2Nb intermetallic alloys, Journal of Materials Research and Technology, Volume 24, 2023, Pages 5215-5234, ISSN 2238-7854.
S.A. Sajadi, MR. Toroghinejad, A. Rezaeian, GhR. Ebrahimi, Research on hot deformation behavior and constitutive model to predict flow stress of an annealed FeCrCuNi2Mn2 high-entropy alloy, Journal of Alloys and Compounds, Volume 937, 2023, 168267, ISSN 0925-8388.
H. Taheri Barayjani, MR. Toroghinejad, A. Rezaeian, A. Shabani, and P. Bocher. "An investigation on microstructure and mechanical properties of a copper strip subjected to different routes of accumulative roll bonding process." Journal of Materials Engineering and Performance 32, no. 2 (2023): 651-659.
2022
S. E. Mousavi, M. Meratian, and A. Rezaeian. "Investigating the Effect of Equal Channel Angular Extrusion on Microstructure and Mechanical Properties of the 60-40 Two-phase Brass Alloy." Journal of Advanced Materials in Engineering (Esteghlal) 36, no. 4 (2022): 21-29.
A. H. Khosrovaninezhad, M. Shamanian, A. Rezaeian, and M. Atapour. "Investigation of the Mechanical Properties of AISI 316 Austenitic Stainless Steel and St 37 Low Carbon Steel Dissimilar Joint by Friction Stir Welding." Journal of Advanced Materials in Engineering (Esteghlal) 34, no. 2 (2022): 89-101.
S. A. Sajadi, MR. Toroghinejad, A. Rezaeian, Zh. Wu, Effect of annealing treatment on microstructural and mechanical properties of a hot-forged FeCrCuMn2Ni2 high-entropy alloy, Materialia, Volume 26, 2022, 101618, ISSN 2589-1529.
A.M. Chizari, A. Kermanpur, E. Foroozmehr, A. Rezaeian, F. Sadeghi, A. Rezaei, Effect of solution treatment on microstructure and stress rupture properties of precipitation hardened IN718 superalloy fabricated by laser powder-bed fusion process, Journal of Materials Research and Technology, Volume 21, 2022, Pages 2296-2308, ISSN 2238-7854.
S. A. Sajadi, MR. Toroghinejad, A. Rezaeian, GhR. Ebrahimi, Dynamic recrystallization behavior of the equiatomic FeCoCrNi high-entropy alloy during high temperature deformation, Journal of Materials Research and Technology, Volume 20, 2022, Pages 1093-1109, ISSN 2238-7854.
HR. Ghorbani, A. Kermanpur, A. Rezaeian, F. Sadeghi, A. Ahmadi Siahboumi, Effect of nitrogen addition and aging treatment on microstructure and high temperature mechanical properties of Ti‐48Al‐2Cr‐2Nb (at%) intermetallic alloy, Journal of Alloys and Compounds, Volume 904, 2022, 164077, ISSN 0925-8388.
S. A. Sajadi, MR. Toroghinejad, A. Rezaeian, GhR. Ebrahimi, A study of hot compression behavior of an as-cast FeCrCuNi2Mn2 high-entropy alloy, Journal of Alloys and Compounds, Volume 896, 2022, 162732, ISSN 0925-8388.
V. Yousefi Mehr, MR. Toroghinejad, A. Rezaeian, H. Asgari, J. A. Szpunar, Abnormal texture evolution of accumulative roll bonded Al–Cu by adding alumina particles, Heliyon, Volume 8, Issue 1, 2022, e08723, ISSN 2405-8440.
2021
V. Yousefi Mehr, A. Rezaeian & Mr. Toroghinejad (2021) Effects of processing parameters on the fracture behaviour of cold roll bonded and accumulative roll bonded Al–Cu lamellar composites, Materials Science and Technology, 37:13, 1096-1106.
V. Yousefi Mehr, MR. Toroghinejad, A. Rezaeian, H. Asgari, J. A. Szpunar, A texture study of nanostructured Al–Cu multi-layered composite manufactured via the accumulative roll bonding (ARB), Journal of Materials Research and Technology, Volume 14, 2021, Pages 2909-2919, ISSN 2238-7854.
A. Rezaei, A. Kermanpur, A. Rezaeian, M. Badrossamay, E. Foroozmehr, F. Sadeghi, J. Han, T. Min Park, Contribution of hot isostatic pressing on densification, microstructure evolution, and mechanical anisotropy of additively manufactured IN718 Ni-based superalloy, Materials Science and Engineering: A, Volume 823, 2021, 141721, ISSN 0921-5093.
H. Khosrovaninezhad, M. Shamanian, A. Rezaeian, J. Kangazian, M. Nezakat, J. A. Szpunar, Insight into the effect of weld pitch on the microstructure-properties relationships of St 37/AISI 316 steels dissimilar welds processed by friction stir welding, Materials Characterization, Volume 177, 2021, 111188, ISSN 1044-5803.
A. Obeydavi, A. Shafyei, A. Rezaeian, P. Kameli, Jyh-Wei Lee, Fabrication and properties evaluation of novel Fe46-XCr23Mo14Co7PXB5Si5 (X=0, 6) m metallic glasses deposited by DC magnetron sputtering, Intermetallics, Volume 131, 2021, 107120, ISSN 0966-9795.
2020
HR. Ghorbani, A. Kermanpur, A. Rezaeian, A. Ahmadi Siahboumi, MA. Taebi, Effect of N addition on microstructure and high temperature mechanical properties of Ti-48Al-2Cr-2Nb (at. %) intermetallic alloy, Materials Today Communications, Volume 25, 2020, 101494, ISSN 2352-4928.
F. Madadi, A. Rezaeian, H. Edris, M. Zhiani, Influence of surface roughness and hydrophobicity of bipolar plates on PEM performance,
Surface and Coatings Technology, Volume 389, 2020, 125676,ISSN 0257-8972.
A. Rezaei, A. Rezaeian, A. Kermanpur, M. Badrossamay, E. Foroozmehr, M. Marashi, A. Foroozmehr, J. Han, Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test, Materials Characterization,
Volume 162, 2020, 110200, ISSN 1044-5803.
A. Obeydavi, A. Shafyei, A. Rezaeian, P. Kameli, Jyh-Wei Lee, Microstructure, mechanical properties and corrosion performance of Fe44Cr15Mo14Co7C10B5Si5 thin film metallic glass deposited by DC magnetron sputtering, Journal of Non-Crystalline Solids, Volume 527, 2020, 119718, ISSN 0022-3093.
2019
H. Vahiddastjerdi, A. Rezaeian, M.R. Toroghinejad, G. Dini, E. Ghassemali, Optimizing pulsed Nd: YAG laser welding of high-Mn TWIP steel using response surface methodology technique, Optics & Laser Technology, Volume 120, 2019, 105721, ISSN 0030-3992.
F. Madadi, A. Rezaeian, H. Edris, M. Zhiani, Improving performance in PEMFC by applying different coatings to metallic bipolar plates, Materials Chemistry and Physics, Volume 238, 2019, 121911, ISSN 0254-0584.
A. Obeydavi, A. Rezaeian, A. Shafyei, P. Kameli, and Jyh-Wei Lee. "Prediction of amorphous phase formation by thermodynamic and kinetic analysis, a Fe-based thin film metallic glass deposited by direct current magnetron sputtering." Materials Research Express 6, no. 9 (2019): 096407.
H. Tavakkoli, B. Niroumand, and A. Rezaeian. "SIMA Processing of Cu34wt.% Zn2wt.% Pb Brass Alloy." Solid State Phenomena 285 (2019): 176-182.
2018
J. Salehi, A. Rezaeian, and MR. Toroghinejad. "Fabrication and characterization of a bimetallic Al/Cu tube using the tube sinking process." The International Journal of Advanced Manufacturing Technology 96 (2018): 153-159.
P. Gheysari, F. Karimzadeh, A. Rezaeian, and A. Shahsavari. "Resistance Spot Welding of nanostructured Al 2024 alloy and Evaluation of weldment mechanical properties." Journal of welding science and technology of Iran, Volume: 3, Issue: 2, Page(s): 49-5, (2018): 49-57.
2017
S. E. Mousavi, M. Meratian, and A. Rezaeian. "Investigation of mechanical properties and fracture surfaces of dual-phase 60–40 brass alloy processed by warm equal-channel angular pressing." Journal of materials science 52 (2017): 8041-8051.
2016
-
2015
Dastranjy Nezhadfar, P., A. Rezaeian, and M. Sojudi Papkiadeh. "Softening behavior of a cold rolled high-Mn twinning-induced plasticity steel." Journal of Materials Engineering and Performance 24 (2015): 3820-3825.
V. Yousefi Mehr, A. Rezaeian, MR. Toroghinejad, Application of accumulative roll bonding and anodizing process to produce Al–Cu–Al2O3 composite, Materials & Design, Volume 70, 2015, Pages 53-59, ISSN 0261-3069.
M. Sojudi Popkiadeh, A. Rezaeian, Gh. Dini, and MR. Toroghinejad. "Hot Deformation Behavior of High Mn TWIP Steel Using the Processing Map." ISIJ International 55, no. 3 (2015): 691-696.
A. Shahsavari, F. Karimzadeh, A. Rezaeian, H. Heydari, Significant Increase in Tensile Strength and Hardness in 2024 Aluminum Alloy by Cryogenic Rolling, Procedia Materials Science, Volume 11, 2015, Pages 84-88, ISSN 2211-8128.
2014
R. Nafar Dehsorkhi, S. Sabooni, F. Karimzadeh, A. Rezaeian, M.H. Enayati, The effect of grain size and martensitic transformation on the wear behavior of AISI 304L stainless steel, Materials & Design, Volume 64, 2014, Pages 56-62, ISSN 0261-3069.
S. Rahmati, A. Ghaei, and A. Rezaeian. "A comparative study between Johnson-Cook and PTW models in simulation of cold spray process." Modares Mechanical Engineering 14, no. 2 (2014): 188-194.
V.Yousefi Mehr, MR. Toroghinejad, A. Rezaeian, Mechanical properties and microstructure evolutions of multilayered Al–Cu composites produced by accumulative roll bonding process and subsequent annealing, Materials Science and Engineering: A, Volume 601, 2014, Pages 40-47, ISSN 0921-5093.
R. Nafar Dehsorkhi, S. Sabooni, F. Karimzadeh, A. Rezaeian, and MH. Enayati. "Study on the wear behavior of ultrafine grained 304L stainless steel." Advanced Materials Research 829 (2014): 177-181.
V. Yousefi Mehr, MR. Toroghinejad, A. Rezaeian, The effects of oxide film and annealing treatment on the bond strength of Al–Cu strips in cold roll bonding process, Materials & Design, Volume 53, 2014, Pages 174-181, ISSN 0261-3069.
2013
-
2012
D. Goldbaum, J. Michael Shockley, Richard R. Chromik, A. Rezaeian, S. Yue, Jean-Gabriel Legoux, and E. Irissou. "The effect of deposition conditions on adhesion strength of Ti and Ti6Al4V cold spray splats." Journal of thermal spray technology 21 (2012): 288-303.
K. Amini, Kamran, S. Nategh, A. Shafyei, and A. Rezaeian. "Effect of deep cryogenic treatment on the properties of 80CrMo12 5 tool steel." International Journal of Minerals, Metallurgy, and Materials 19 (2012): 30-37.
S.H. Mousavi Anijdan, A. Rezaeian, S. Yue, The effect of chemical composition and austenite conditioning on the transformation behavior of microalloyed steels, Materials Characterization, Volume 63, 2012, Pages 27-38, ISSN 1044-5803.
2011
K. Amini, S. Nategh, A. Shafyei, and A. Rezaeian. "The effect of temperature of cryogenic treatment on microstructure and wear behavior of 1.2304 cold work steel." Iranian Journal of Surface Science and Engineering 11 (2011): 11-24.
2010
K. Amini, S. Nategh, A. Shafyei, and A. Rezaeian. "The effect of deep cryogenic treatment on mechanical properties of 80CrMo12 5 tool steel." International Journal of Iron & Steel Society of Iran 7, no. 2 (2010): 12-17.
W. Wong, A. Rezaeian, E. Irissou, J. Gabriel Legoux, and S. Yue. "Cold spray characteristics of commercially pure Ti and Ti-6Al-4V." Advanced materials research 89 (2010): 639-644.
2009
A. Rezaeian, W. Wong, S. Yue, E. Irissou, and J. G. Legoux. "Effect of gun traverse speed on microstructure and bond strength of cold sprayed Ti6Al4V and Ti coatings." Mater. Sci. Technol.(MS&T) (2009): 25-29.
2008
A. Rezaeian, F. Zarandi, and S. Yue. "Mechanism of hot ductility improvement of a peritectic steel containing vanadium using very-high-temperature compression." Metallurgical and Materials Transactions A 39 (2008): 2635-2644.
Y. Zou, A. Rezaeian, J. Szpunar, E. Irissou, and S. Yue. "Structural Transformation and Mechanical Properties of Cold Sprayed Nickel Coatings after Annealing." MRS Online Proceedings Library (OPL) 1151 (2008): 1151-SS01.
2007
S. Zhirafar, A. Rezaeian, M. Pugh, Effect of cryogenic treatment on the mechanical properties of 4340 steel, Journal of Materials Processing Technology, Volume 186, Issues 1–3, 2007, Pages 298-303, ISSN 0924-0136.
J. Calvo, A. Rezaeian, J.M. Cabrera, S. Yue, Effect of the thermal cycle on the hot ductility and fracture mechanisms of a C–Mn steel, Engineering Failure Analysis, Volume 14, Issue 2, 2007, Pages 374-383, ISSN 1350-6307.
J. Calvo, José María Cabrera, A. Rezaeian, and S. Yue. "Evaluation of the hot ductility of a C–Mn steel produced from scrap recycling." ISIJ international 47, no. 10 (2007): 1518-1526.